香港快意討論區 » 技術支援 » 20vt cam position

古惑強 發表於 2011-12-22 17:44

20vt cam position

我仲以為死氣cam跳左兩齒!

Autodata diagram
[IMG]http://img.photobucket.com/albums/v426/rikki16vt/20vt_cam_position.jpg[/IMG]

My 20vt crankshaft position
[IMG]http://img.photobucket.com/albums/v426/rikki16vt/IMG512.jpg[/IMG]

My 20vt Exhaust cam position
[IMG]http://img.photobucket.com/albums/v426/rikki16vt/IMG509.jpg[/IMG]

古惑強 發表於 2011-12-22 17:50

再揾鬼仔求救，原來係用曲軸 marking + 生氣及死氣 cam lock 黎定位，唔係用個死氣cam marking 黎定位!  真屌!
[url]http://www.fccuk.org/forum/ubbthreads.php?ubb=showflat&Number=1189641#Post1189641[/url]
[img]http://i2.photobucket.com/albums/y21/zero_2976/Coupe related/ExhaustCamMarking.jpg[/img]

古惑強 發表於 2011-12-23 09:57

Autodata 既圖係錯既，要用返 Fiat 維修圖，一係用 camlock，一係自己做生死氣Cam marking!
[IMG]http://img.photobucket.com/albums/v426/rikki16vt/fiat_20vt_timing1.jpg[/IMG]
[IMG]http://img.photobucket.com/albums/v426/rikki16vt/fiat_20vt_timing2.jpg[/IMG]

Simon 發表於 2011-12-23 10:11

搵唔到 20v turbo cam lock

古惑強 發表於 2011-12-23 10:45

Okay, no problem, hand marking on both cams will be okay for me.  Thanks for checking anyway.

古惑強 發表於 2012-11-1 22:13

Click " 高級模式", then click "picture".

古惑強 發表於 2012-11-6 08:37

上手車主咁大整古！  唔通你同佢好大仇口？{:4_119:}

古惑強 發表於 2012-11-21 10:02

整翻好未？

查看完整版本: 20vt cam position