coupeelvin

Any idea about the price of RE-11 215/45R17?
Thinking of RE-11 at the front, this RS sport at rear....

coupeelvin

OZ Super Leggera

coupeelvin

唔一樣，佢係Ultra Leggera...
RE-11 要$16xx/條， RS Sport $1100/條， Z1* $1150/條

coupeelvin

換咗呔...... 前 RE-11， 後 RS Sport.
不過出咗事！ 用咗215/45R17 原來會勁刮沙板同埋輪拱內的軟膠。
又原來螺絲太長....
結果前面用番原裝螺絲： 加咗spacer後比原本短咗2mm
後面用厚spacer加27mm螺絲
家陣係咁o夷都刮沙板，冇得皮添....

coupeelvin

唉！ 諗住 45會舒服Ｄ，點知道.......

coupeelvin

Stock tire diameter is: 24.1 inch
215/45R17 tire diameter is: 24.6 inch
215/40R17 tire diameter is: 23.8 inch
Obviously, 215/40R17 is closer to stock tire diameter.

But, does the 0.5inch difference between stock tire and my selected 45R17 tire contribute to the tire scratch?  Or, because of the spacer that makes the tires closer to the tire arch?

coupeelvin

Now, front spacer thickness is 10mm, rear is 15mm

coupeelvin

Found 3 possible solutions:
1. http://tw.page.bid.yahoo.com/tw/show/qanda?aID=b52259440 全車系避震器彈簧膠條、彈簧膠墊

2. http://tw.page.bid.yahoo.com/tw/auction/c46454911 JURID高效能汽車彈簧緩衝器支墊 緩衝墊

3. http://tw.page.bid.yahoo.com/tw/auction/b46356760?u=youngban 類似BMW E39 E38專用 強化型後避震器 加強 加高 墊片

coupeelvin

I am in Taiwan now....
letsrock 發表於 2010-2-24 18:09

Do you imply you can bring parts back to HK?

coupeelvin

Patrick 講得啱。 我諗緊前面最細offset應該係幾多呢? 而家係10mm， 如果縮到6mm又得唔得呢?
跟住要升高番條避震大約10mm， 所以我諗option 2 唔係咁work， 佢只係限制彈弓行程， 唔係提高部車。

coupeelvin

買果對墊加安裝價錢同效能, 會唔會比賣走對RE-11, 而換一對215/40R17 Sports RS為高呢?
Simon 發表於 2010-2-24 19:17

我對40呔冇咩野好感....所以我先揀45呔。 而家我當然想繼續用45呔喇。

coupeelvin

睇張相...你條鈴都真係出左Ｄ，offset幾多黎？
PuntoPatrick 發表於 2010-2-24 23:16

OZ 好似係 ET37, spacer 係前10mm 後15mm

coupeelvin

Letsrock  我問過佢喇，佢係 40 呔， 印象中spacer 應該係10mm.

coupeelvin

Investingating Bravo's top mount to replace Coupe's top mount.  http://www.fccuk.org/forum/ubbth ... r=968494&page=1
And Weitec distance kit at the rear....

coupeelvin

It looks quite strange to me.... Why Bravo top mount only fits for coilover? It was designed to fit original suspension that is the same design as Coupe's....

coupeelvin

你唔係買左比coupe用咩?之後比左我?
Simon 發表於 2010-2-26 21:53

仲有冇係度?我想睇下啱唔啱駛呀。

coupeelvin

會長， 你比較有經驗。 我係網上搵到 bravo 嘅前避震同埋strut top mount嘅相， 你可唔可以睇睇呢個top mount 同我們的coupe 有冇不同， 到底coupe可唔可以用呢個top mount 呢?

coupeelvin

後spacer 改番用10mm spacer 已經冇問題。
而家諗緊辦法搞前面的問題。

coupeelvin

Jockey, I think you're right, should try out original coil spring + Bilstein first....
Bilstein Sports (B6) dampers - FRONT http://www.europerformance.co.uk ... ml?product=15354004

Car fitment
FIAT COUPE (FA/175) 2.0 20V Turbo 08/96 > 08/00 (220bhp / 162kw)
If you expect more damping power from your shock absorber ??even under loads ??but don? want to opt for an all-out sports model, the BILSTEIN B6 is the ideal solution.

The Product benefits at a glance:
Increased power reserves and service life, even when pulling transporters and trailers or during frequent journeys with loads
Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations
Marked improvements in safety and sportiness without additional spring changes (lowering)
Gas Pressure technology
BILSTEIN mono-tube/Upside-Down technology, made in Germany
Road-tested by BILSTEIN and fine-tuned
No German TUV registration required.

coupeelvin

Do you still have the original set of springs?
古惑強 發表於 2010-3-9 16:39

有呀，原裝彈弓同避震都有呀。 不過佢地係粉嶺屋企果邊，要這個星期日先番去攞。