返回列表 發帖
阿良話可能比錯彈弓. 叫我可以拆走個校高低個托, low低5cm. 好喎.
逢星期日...糕-糕-糕.

TOP

係? Nice and simple!! Good!!

TOP

原來我裝錯左!!!!!
逢星期日...糕-糕-糕.

TOP

點錯法....

TOP

Spring upside down?

TOP

真係想而家落去拆左佢.
無奶油上次留意唔到. 拆螺絲時一定見裡面舊圓野分開.
附件: 您需要登錄才可以下載或查看附件。沒有帳號?註冊
逢星期日...糕-糕-糕.

TOP


我果套無刻度嘅?!?!
逢星期日...糕-糕-糕.

TOP

我果套係豪華版
Coupe Coupe Go Go Go!!

TOP

我無錯喎!!!!
係個彈弓托個底有個螺絲位令佢放唔入個搖臂凸位度.
我覺得係個托有問題!!!
附件: 您需要登錄才可以下載或查看附件。沒有帳號?註冊
逢星期日...糕-糕-糕.

TOP

個窿係準備好51mm, 估佢都係放入去, 不過有個野頂住.
附件: 您需要登錄才可以下載或查看附件。沒有帳號?註冊
逢星期日...糕-糕-糕.

TOP

本帖最後由 Simon 於 2010-7-7 20:13 編輯

尾唔裝校高低個托
set camber盡晒, set左toe, 避震筒擰入至46mm
最後高度前63.5cm, 尾61cm
附件: 您需要登錄才可以下載或查看附件。沒有帳號?註冊
逢星期日...糕-糕-糕.

TOP

已裝,但頭尾太高, 要low 底15mm 左右,
軚尺唔啱, 左左唧, 要low 底完行番兩三星期,
等彈弓坐定左先去度軚尺.

TOP

唔知係咪行慢車好跳呢?
今朝快唔到, 我記得星期日無咁跳架喎!
逢星期日...糕-糕-糕.

TOP

校toe工具, 20 & 11, 擰出toe in, 擰入 toe out
逢星期日...糕-糕-糕.

TOP

Yes, compare to my KW V2, the rear (setting a rate 15) is a bid bumpy.

TOP

唔知係咪行慢車好跳呢?
今朝快唔到, 我記得星期日無咁跳架喎!
Simon 發表於 2010-7-8 09:28



2 things here :

1. may be the springs have settled down and compressed a little bit more after 1 week, so the kg/mm rate has gone up a bit.
2. you can try to compensate the slightly higher kg/mm spring rate by tuning the rear shocks to be 1 or 2 degree harder to match the spring rate and try try!

TOP

征服唔到大山, 拋左過對面咁濟. 好牙煙.
逢星期日...糕-糕-糕.

TOP

Front or the rear?

TOP

分唔到, 不過似個頭. 一拋就想過對面. up吓up吓咁衝落山.
逢星期日...糕-糕-糕.

TOP

Let's set the front shocks to slightly harder as well, because Jockey's super car uses a tougher anti-roll bar than a standard coupe, so he could be using a softer shocks setting than you would ideally be using.

TOP

返回列表