返回列表 發帖

Raymond Sir

Raymond Sir, your Lancia error as follows :

1st byte = 0
2nd byte = 12
3rd byte = 0

2nd byte
12=1100 binary

2nd bit = Eprom error
3rd bit = EEprom error



I suspect you might have a poor connection somewhere, otherwise you can't start the engine at all.

TOP

Eprom is a checksum error only, otherwise you won't even be able to start the car.

EEprom error is a bit troublesome, may be the chip is dying or so.  However, the eeprom is used for storing errors and some adjustment parameters etc. You can carry on using it.

TOP

返回列表