Board logo

標題: 水喉制 [打印本頁]
作者: Simon    時間: 2009-5-5 07:11     標題: 水喉制

rikki, JRT, 你地好似加左個水喉制, 最近表現好肯上喎.
咩牌子?
作者: 古惑強    時間: 2009-5-5 09:58

I think JRT is using Greddy electronic one, I am only using a cheap cheap cheap mechanical one!
作者: letsrock    時間: 2009-5-5 10:17

Hey Rikki, how was it on our return trip on sunday after the adjustment?
作者: Eric    時間: 2009-5-5 12:53

I will install a HKS EVC on my R32. The HKS has a stepping motor which is more accurate.
作者: 古惑強    時間: 2009-5-5 13:31

Hey Rikki, how was it on our return trip on sunday after the adjustment?
letsrock 發表於 2009-5-5 10:17


I have de-tuned it a bit too much and it settles at around 0.5 bar, I need to adjust it a couple more times, I would be happy to settle down at 0.8 bar, looking for endurance rather than outright max power.
作者: 古惑強    時間: 2009-5-5 15:14

Greddy digital boost controller is about HK$3000-, a cheap cheap mechanical one is about HK$200!!!

Since I only use the boost controller to confirm that my engine and air pipes are secured and no leakage, so I don't need a digital programmable one.
作者: letsrock    時間: 2009-5-5 15:23

Thanks For sharing, wonder if I should install it too...
作者: 古惑強    時間: 2009-5-5 16:33

First of all, you need to have a boost gauge installed then you can consider to add the boost controller.
作者: letsrock    時間: 2009-5-5 16:45

Tusen Kee is installing ( as of this minute) the boost gauge that I got from drug lord last year
作者: letsrock    時間: 2009-5-5 17:00

Tsuen Kee has given up on the installation....either the boost Gauge is not working, or it is just too complicated for them to install.......Will pick up the car tonight.
作者: 古惑強    時間: 2009-5-5 17:41

Oh shit!
作者: jockey    時間: 2009-5-5 22:02

Where will you put the gauge?

For me, a stand alone guage is difficult to match the interior.
JRT 發表於 2009-5-5 18:03


Agree with u!!!
作者: Trevor    時間: 2009-5-6 00:56

Where will you put the gauge?

For me, a stand alone guage is difficult to match the interior.
JRT 發表於 2009-5-5 18:03


Agree! That's why I find yours more attractive... can show the info without sacrificing the cool interior.
作者: 古惑強    時間: 2009-5-6 12:34

I think a boost gauge on the right hand corner or A pillar is just fine, otherwise it is totally none re-readable during driving, which is defeating the original purpose of the boost gauge.
作者: jockey    時間: 2009-5-6 14:51

Your boost Contorller already use stepping motor !!! it is more reliable than old design!!



歡迎光臨 香港快意討論區 (http://forum.hkfiatclub.com/) Powered by Discuz! 7.2