香港快意討論區 - Powered by Discuz! Board

標題: Turbo [打印本頁]

作者: letsrock 時間: 2009-10-27 23:18 標題: Turbo

Dear brothers,

any comments on this?
Hybrid Turbo

作者: coupeelvin 時間: 2009-10-28 11:59

Remembering that Anthony has a hybird turbo installed in his Coupe.....

作者: 古惑強 時間: 2009-10-28 12:35

I think Anthony's hybrid turbo setup is geared towards bigger BHP rather than quicker spool up time, but I think it is better for the man to explain it himself!

Anthony, Where the hell are you!

作者: 古惑強 時間: 2009-10-28 12:40

本帖最後由古惑強於 2009-10-28 22:42 編輯

Btw, if you are considering a hybrid turbo (=$$$$) for quicker spool up time rather than mega BHP boost, and you intend to keep the turbo boost within a sensible level say around 1.1 bar then you probably don't need a re-map of the your ECU.

I am keeping my 16vt at 0.9bar (13 psi) for long term reliability!

作者: Simon 時間: 2010-1-2 00:54

for your information, let'srock

How should I break in a turbo?
A properly assembled and balanced turbo requires no specific break-in procedure. However, for new installations a close inspection is recommended to insure proper installation and function. Common problems are generally associated with leaks (oil, water, inlet or exhaust).

from http://www.turbobygarrett.com/tu ... enter/faqs.html#t12

作者: Simon 時間: 2010-1-2 00:56

then try to follow this fitting guide
http://www.turboactive.com/fitting.aspx

作者: letsrock 時間: 2010-3-4 17:46

Turbo installed and still smoke coming out.......will try with another turbo tomorrow and see.

作者: 古惑強 時間: 2010-3-4 17:52

You are seriously unlucky!!!

作者: puntoarvin 時間: 2010-3-4 18:47

我重擔心呀

! 點會估到一隻全新TURBO會出現火箭升空現象.....

見到真係想喊.....

作者: AbarthJoe 時間: 2010-3-4 19:34

有無機會係以前嘔油, 所以條死氣喉或者死氣鼓入面屯積D機油未燒晒咋?

作者: letsrock 時間: 2010-3-4 22:09

You are seriously unlucky!!!
古惑強發表於 2010-3-4 17:52

This is an understatement

作者: puntoarvin 時間: 2010-3-4 22:15

回復 10# AbarthJoe

燒咗幾個鐘都唔得, 唉....

作者: letsrock 時間: 2010-3-4 22:17

見到真係想喊.....
puntoarvin 發表於 2010-3-4 18:47

I wanted to cry just by hearing it....

作者: Trevor 時間: 2010-3-4 22:37

Oh no...

You really need lots of luck mate! Hope it's just the turbo.

作者: AbarthJoe 時間: 2010-3-4 23:06

加油加油!

作者: 古惑強 時間: 2010-3-4 23:40

聞者傷心、聽者流淚！

作者: PuntoPatrick 時間: 2010-3-4 23:45

其實D偈油係咪吾係由個turbo漏架？

作者: 古惑強 時間: 2010-3-5 10:37

Swapping the turbo today to see what is the problem.

作者: paul 時間: 2010-3-5 11:13

If the smoke is as thick as befor like the old turbo, it shouldn't be the problem from turbo

My punto was cleared from the smoke after installed the new turbo.

作者: TheBlackCoupe 時間: 2010-3-5 12:01

提示: 作者被禁止或刪除內容自動屏蔽

作者: 6dick 時間: 2010-3-5 14:57

Add oil letsrock

作者: letsrock 時間: 2010-3-5 15:17

回復 21# 6dick

Thanks. to the car and to Hong.

But not to the turbo please....

作者: AbarthJoe 時間: 2010-3-6 00:38

回復 6dick

Thanks. to the car and to Hong.

But not to the turbo please....
letsrock 發表於 2010-3-5 15:17

Letsrock, I'm sorry... hope your turbo no oil no oil...

作者: 6dick 時間: 2010-3-6 02:17

ha ha

作者: 古惑強 時間: 2010-3-6 02:32

Any progress?

作者: letsrock 時間: 2010-3-6 06:04

Thanks Joe.

Rikki, i should be hearing from Hong or Arvin today i guess. Will keep you guys posted.

作者: 古惑強 時間: 2010-3-6 09:09

I should drop by the garage later on today.

作者: letsrock 時間: 2010-3-6 09:14

回復 27# 古惑強

What time?
I can stop by around 3'ish.

作者: Eric 時間: 2010-3-6 10:07

ok, we meet at around 3, I need to take my R32 at there also.

作者: 古惑強 時間: 2010-3-6 13:36

Oops .................. I was there around 12:00pm, not good news!

作者: puntoarvin 時間: 2010-3-6 16:57

努力中....已經清楚問題的根源, 唉, 唔好再玩喇, 夠喇!

作者: puntoarvin 時間: 2010-3-6 17:00

講真, 真係有D洩氣, 但慶幸有零件STANDBY, 唔係就更加慘....

作者: letsrock 時間: 2010-3-6 17:06

Many thanks Arvin for keeping up with my Coupe.

作者: fiatkid 時間: 2010-3-7 03:13

提示: 作者被禁止或刪除內容自動屏蔽

作者: Trevor 時間: 2010-3-7 22:50

keep it up boys!

作者: paul 時間: 2010-3-8 09:37

為你打氣打氣

作者: letsrock 時間: 2010-3-8 15:46

Thanks everyone for your support!

作者: Eric 時間: 2010-3-8 17:05

What is the latest situation now? are you able to take out this Sunday?

作者: letsrock 時間: 2010-3-8 17:54

the latest is, the cylinder head is also cracked, and according to reliable source, one of the piston was wedged before also.

Hong will take it apart and have a closer look.

I would love to come out this Sunday, but i do not dare to rush Hong, as i rather they do a thorough check first.

歡迎光臨香港快意討論區 (http://forum.hkfiatclub.com/)