標題: Raymond Sir [打印本頁] 作者: 古惑強 時間: 2010-12-6 09:24 標題: Raymond Sir
Raymond Sir, your Lancia error as follows :
1st byte = 0
2nd byte = 12
3rd byte = 0
2nd byte
12=1100 binary
2nd bit = Eprom error
3rd bit = EEprom error
I suspect you might have a poor connection somewhere, otherwise you can't start the engine at all.作者: 古惑強 時間: 2010-12-6 09:47
Eprom is a checksum error only, otherwise you won't even be able to start the car.
EEprom error is a bit troublesome, may be the chip is dying or so. However, the eeprom is used for storing errors and some adjustment parameters etc. You can carry on using it.作者: 古惑強 時間: 2010-12-12 19:05
