香港快意討論區 - Powered by Discuz! Board

標題: Punto GT wheel spec [打印本頁]

作者: Simon 時間: 2009-7-6 11:32 標題: Punto GT wheel spec

4 holes PCD 98 offset 35 to 45mm centre bore 58.1
quoted from http://www.bikerlifestyle.co.uk/tech/pcd/pcd.html
Try to search using these parameter
http://search.auctions.yahoo.co. ... cale=0jp&acc=jp

作者: Simon 時間: 2009-7-6 11:33

http://page17.auctions.yahoo.co.jp/jp/auction/v106035383
this is cool

作者: 古惑強 時間: 2009-7-6 11:49

Oh dear! I am so tempted by this one for my Bravo!

http://page11.auctions.yahoo.co.jp/jp/auction/n72554099

作者: paul 時間: 2009-7-6 11:55

Thanks Simon,
I am looking for a set to replace the old one, all four are deformed.

作者: paul 時間: 2009-7-6 11:59

Dear brothers,
Do you have a set of wheels for my punto?

作者: 古惑強 時間: 2009-7-6 11:59

本帖最後由古惑強於 2009-7-6 12:02 編輯

You can check out the Taiwan yahoo auction site as well, so new & 2nd hand one.
http://tw.search.bid.yahoo.com/s ... %94+98&ei=UTF-8

The OZ lookalike is a pretty good value at HK$2000~2500, but you need to figure out how to ship them back!

作者: Simon 時間: 2009-7-6 12:02

http://tw.page.bid.yahoo.com/tw/auction/e34325885

套鈴唔係乜野, 間公司個名先有型.

作者: PuntoPatrick 時間: 2009-7-6 12:08

爛屎眼.掉他

作者: TheBlackCoupe 時間: 2009-7-6 18:00

提示: 作者被禁止或刪除內容自動屏蔽

作者: 古惑強 時間: 2009-7-6 18:02

Sorry to interrupt, I think 20v (NA) wheels are 15 inch.

作者: TheBlackCoupe 時間: 2009-7-7 03:05

提示: 作者被禁止或刪除內容自動屏蔽

作者: paul 時間: 2009-7-7 09:01

9# TheBlackCoupe

Thank you brother, but it is not match with the style.

作者: 古惑強 時間: 2009-7-7 10:31

本帖最後由古惑強於 2009-7-7 10:32 編輯

How about some nice Novitec wheels!
http://www.fiat-sportiva.de/index.php/cat/c309_Wheels.html

作者: 古惑強 時間: 2009-7-7 10:42

Oh dear! I am so tempted by this one for my Bravo!

http://page11.auctions.yahoo.co.jp/jp/auction/n7 ...
古惑強發表於 2009-7-6 11:49

Sold with "Buy it now."!

作者: Simon 時間: 2009-7-7 10:43

好彩你買唔到. 都唔襯Bravo.

作者: paul 時間: 2009-7-7 13:56

13# 古惑強

Thanks Riki, Novitec no la, I am checking the TW link you gave me yesterday, for the TW OZ, what is you comment on it? TW OZ is no OZ actually, right?

作者: 古惑強 時間: 2009-7-7 14:09

TW OZ is actually D.2. lookalike. Quite good price actually between HK$2500~3000 for a set of 4, it might be possible they are also on sale in some of the HK tyre shops, will need to look around for them. In terms of weight, most of these vendors refuse to answer the weight question, however some of them reply as 9.2kg for the 16" (for 15" it should be slightly lighter) which I guess is not very light in modern terms, but I suppose "You get what you pay for".

For Punto GT, I guess 15" is more suitable, while for my Bravo, 16" is ideal.

作者: paul 時間: 2009-7-7 14:56

17# 古惑強

Thanks Riki, agree with your comment, I stick to 15 in only, but want to get one lighter if possible. rubbing is no high performance

作者: 古惑強 時間: 2009-7-7 15:13

For TW rims with price rang around HK$2,000, you can't be too picky about the weight, for Jap / European true light weight rims (less than 6kg per rim), the cost would easily be 2~3 times higher.

作者: paul 時間: 2009-7-7 16:20

19# 古惑強

YES

作者: PuntoPatrick 時間: 2009-7-17 23:43

http://cgi.ebay.co.uk/ws/eBayISA ... p;item=140327702907

作者: 古惑強 時間: 2009-7-18 09:06

$$$$$$$$$$$$$

作者: 6dick 時間: 2009-7-18 14:34

Paul 正ar屌起佢快快快快

作者: paul 時間: 2009-7-18 20:05

Sorry, not much feel

, Thanks Patrict for the information

作者: 古惑強 時間: 2009-7-21 15:29

Hey Paul,

Check this one out! This is 4 x 100 pcd, you can use wobbly nuts + 中心圈 to make them fit your Punto GT. Only $700 + a can of white paint!
http://www.28car.com/par_dsp.php ... _vw=1&h_f_ty=a6

作者: paul 時間: 2009-7-21 15:41

Just called the seller, he said it is originated from Honda Civic, I will ask Isaac to see if he likes it. Thanks Rikki!!

作者: 古惑強 時間: 2009-7-21 15:55

Oh shit! 4 x 100 pcd Honda Civic uses 56.1mm center bore, while the Fiat Punto uses 58.1mm center bore. These wheels will not be able to fit on your Punto unless you are prepare to drill the center bore of the wheels.

Better to walk away, so sorry!

作者: paul 時間: 2009-7-21 16:59

Thanks Riki

作者: 古惑強 時間: 2009-7-21 18:16

Or try this :
Japan RAYs wheel : HK$3800, you can try and negotiate a lower price without the tyres.
4 x 100 pcd, offset 38

http://www.28car.com/par_dsp.php ... do=1&h_l_page=4

作者: 古惑強 時間: 2009-7-24 18:53

This one is a cheap cheap Taiwan wheels, only HK$1700-, 100 x 4 , 7J, 38 offset!
http://hk.f1.page.auctions.yahoo ... 688908?r=1333778411

作者: paul 時間: 2009-7-27 23:09

29# 古惑強

Dear Rakki,

I have called the saler, 3k without tyres, but Isaac did not like that style

作者: 古惑強 時間: 2009-7-28 17:32

本帖最後由古惑強於 2009-7-28 17:34 編輯

$3K without tyres for 15" RAYS wheel is only so-so, you haven't missed anything!

作者: paul 時間: 2009-7-28 23:42

32# 古惑強
YES

作者: PuntoPatrick 時間: 2009-8-4 13:20

OK喎！
http://car8.com/2partdetails.php?id=170948

作者: 古惑強 時間: 2009-8-4 13:23

Wow! I like it!

作者: PuntoPatrick 時間: 2009-8-4 13:23

5 time finish...
http://car8.com/2partdetails.php?id=172297

作者: PuntoPatrick 時間: 2009-8-4 13:25

http://car8.com/2partdetails.php?id=170618

鍛...

作者: 古惑強 時間: 2009-8-4 13:27

http://www.work-wheels.net/produ ... id=7&Item_id=47

作者: 古惑強 時間: 2009-8-4 13:37

本帖最後由古惑強於 2009-8-4 13:39 編輯

Paul, too bad the Work Emotion is 16" wow!

作者: paul 時間: 2009-8-4 15:51

本帖最後由 paul 於 2009-8-4 21:56 編輯

Too bad

, thanks gentlemen

作者: paul 時間: 2009-8-4 15:58

5 time finish...
http://car8.com/2partdetails.php?id=172297
PuntoPatrick 發表於 2009-8-4 13:23

Isaac and I will go to take a look for this at 6pm today, the price seems too low???

作者: PuntoPatrick 時間: 2009-8-4 16:03

本帖最後由 PuntoPatrick 於 2009-8-4 16:04 編輯

Paul, too bad the Work Emotion is 16" wow!
古惑強發表於 2009-8-4 13:37

then is your turn...

作者: Eric 時間: 2009-8-4 16:08

Paul, too bad the Work Emotion is 16" wow!
古惑強發表於 2009-8-4 13:37

No regret at all, this Works Emotion is indeed very heavy.

作者: 古惑強 時間: 2009-8-4 16:30

No regret at all, this Works Emotion is indeed very heavy.
Eric 發表於 2009-8-4 16:08

Really? I thought they are light weight rims wow!

作者: 古惑強 時間: 2009-8-4 16:32

Isaac and I will go to take a look for this at 6pm today, the price seems too low???
paul 發表於 2009-8-4 15:58

Seems a bit old, price is good, should ask a friendly tyre shop to check for vibrations before paying. The holes seems to be big enough for wobbly nuts.

作者: paul 時間: 2009-8-4 22:18

Proved to be light weight and the condition is good, we had done a test on the balance machine, good balance with good roundness, there are some new 15" taiwan wheels in the shop, they are heavier than this one about 1 kg each!
Some damage on the white paint but still acceptable, good enough for my old Punto

Will take my Punto for trial fit when my punto roll out from the workshop. Isaac like the white wheel, he said he rather to have a white cat than a Panda

作者: PuntoPatrick 時間: 2009-8-4 22:59

good!

作者: paul 時間: 2009-8-4 23:06

Thanks Gentelmen, see if it can fit my punto

作者: 古惑強 時間: 2009-8-5 00:06

You will need wobbly nuts to make them fit!

作者: Trevor 時間: 2009-8-5 00:50

48# paul

good for ya! hope it fits!

作者: paul 時間: 2009-8-5 08:54

49# 古惑強
Yes, see if the set of wobbly nuts I am using can fit or not, I am worrying if the counter sunk of the nut can fit the nut base of the wheel.

作者: 古惑強 時間: 2009-8-5 11:31

Red Dick has a set of old wobbly nuts as well, if your existing set does not fit then you can ask him to borrow his old set to try it out. But I would not advise you to use his set on a permanent basis as I noticed some of the threads were a bit worn out.

You will need the center adapter ring as well, if the tyre shop charges you very much then you should talk to Jason laa, as he should be able to custom make one set for you with a reasonable price tag.

作者: paul 時間: 2009-8-6 09:20

Thanks Rikki

作者: paul 時間: 2009-8-6 21:43

本帖最後由 paul 於 2009-8-7 09:44 編輯

Dear all,
哈哈 patrick , 你介紹條鈴俾我是有陰謀的!
願來你想我做白貓你就做熊貓

睇貓!

作者: PuntoPatrick 時間: 2009-8-6 22:03

good look!

作者: 古惑強 時間: 2009-8-6 22:08

look very good wow!

作者: Trevor 時間: 2009-8-6 22:18

唔錯喎!

作者: marcus 時間: 2009-8-6 22:31

好有型呀~

作者: paul 時間: 2009-8-7 09:48

The performance are good too! Faster pick up and shorter braking distance, all due to light weight wheels, need to test at higher speed for vibration.

Thanks to all help

作者: 古惑強 時間: 2009-8-7 09:50

OK喎！
http://car8.com/2partdetails.php?id=170948
PuntoPatrick 發表於 2009-8-4 13:20

Gone!

作者: Simon 時間: 2009-8-7 09:57

59# paul

好呀好呀, 換鈴感覺好好.

作者: Eric 時間: 2009-8-7 10:00

Good. Did you change the tyres also?

作者: paul 時間: 2009-8-7 10:10

Not yet, will do after full test on the wheels

作者: 古惑強 時間: 2009-8-7 10:16

Have you sorted out the center rings?

作者: paul 時間: 2009-8-7 10:34

Yes, a new set of centre ring was fitted at reasonable price

作者: 古惑強 時間: 2009-8-7 11:53

wow! The tyre shop has off the shelf center rings for 58.1mm? Good wow! How much did they cost you?

作者: paul 時間: 2009-8-7 21:52

They have 57.1, modified to 58.1, it fit well to the hubs, cost HKD 100 each, alluminium center rings. not cheap because of the modification cost.

作者: 古惑強 時間: 2009-8-8 00:34

That's pretty good price for aluminium centre ring.

作者: paul 時間: 2009-8-8 20:21

本帖最後由 paul 於 2009-8-8 21:20 編輯

Dear all,
Just took the Punto for a full test this morning, to and from Tai po rd and to lok ken, combined with highway, no more vibration la

The conering ability has increased, the road feed back is more clear, The orginal front track width and the rear track width is 1380 and 1360 mm. the new set of wheels got different sets of ET, front offset of the wheels is ET33 and the rear is ET38, a total of 10 mm more in the front, it makes a big different

作者: paul 時間: 2009-9-29 14:53

Dear all, my "5 time finish" wheels got structural cracks at both rear wheels, it is really "5 time finish" ( It cracks after 5 breadfast meeting

)

Red Dick has prepare some new foot for my Punto, see which one you like;

OZ Super turismo WRC
[attach]544[/attach]

OZ Ultraleggera
[attach]545[/attach]

SSR Professor SP1 R
[attach]546[/attach]

OZ Ultraleggera Serie Rossa with Red Abarth Hubcap
[attach]547[/attach]

No second hand wheels la, have to buy new one

作者: 古惑強 時間: 2009-9-29 15:23

Oh dear! That's bad bad news!

1st choice : OZ Super turismo WRC
2nd choice : OZ Ultraleggera Serie Rossa with Red Abarth Hubcap

You planning to buy the real O.Z. or Taiwanese copies?

作者: PuntoPatrick 時間: 2009-9-29 15:25

咁快爛左？

作者: paul 時間: 2009-9-29 16:14

I am quite disappointed, the " 5 times finish" is good looking and with good performance

.

I would buy the real OZ for better quality, it would takes about 2 months for delivery after the deposite, that means:
1. To drive very carefully before the new wheels arrive.
2. Switch back to the old wheels in the waiting period.

See the cracks, on both rear wheels.
Right rear
[attach]548[/attach]

Left rear
[attach]549[/attach]
Same cracks all round the wheel cup

作者: 古惑強 時間: 2009-9-29 17:06

I bet the previous garage just put in some filler, sand paper it and then re-spray it before selling.

作者: Eric 時間: 2009-9-29 17:52

I bet the previous garage just put in some filler, sand paper it and then re-spray it before selling.
古惑強發表於 2009-9-29 17:06

I think so.

作者: AbarthJoe 時間: 2009-9-30 00:30

操到裂左咁勁？

作者: paul 時間: 2009-9-30 10:16

76# AbarthJoe

Not by me I think.

作者: 古惑強 時間: 2009-9-30 14:55

How much for the O.Z. wheels? 15" or 16"?

作者: paul 時間: 2009-9-30 15:51

For 7J15 4x100 around HKD 1400 each, it varies from HKD 1600 to 1400, depends on which shop you place the order. Any brothers got good price form some shops?

作者: paul 時間: 2010-1-27 14:54

本帖最後由 paul 於 2010-1-27 14:59 編輯

Dear all,
I got my new OZ wheels today.
Enjoy

Paul
[attach]971[/attach]
[attach]970[/attach]
[attach]972[/attach]

作者: 古惑強 時間: 2010-1-27 15:18

NICE!

作者: letsrock 時間: 2010-1-27 16:04

Nice Paul! Do you know how much are they for 17/215 Superleggera? I might want to get a set for my IS. Can you pass me the name and # of your shop?

作者: 古惑強 時間: 2010-1-27 16:10

Letsrock, have you won the lottery or robbed a bank! Your motor-sport expenditure has gone through the roof and keep on raising!

作者: letsrock 時間: 2010-1-27 16:24

Just that i was under a lot of stress in Oct and Nov, and now much relieved. Also the financing of the IS is over. So can use the $ on a bit of upgrading.

作者: paul 時間: 2010-1-27 17:28

本帖最後由 paul 於 2010-1-27 17:32 編輯

Dear williem,
Shop name:成達膠輪
tel:27825200
旺角黑布街

作者: letsrock 時間: 2010-1-27 22:15

Thanks Paul!

作者: paul 時間: 2010-2-11 16:14

Dear all,
The performance of the OZ is no matched with the 5 times finish, the 5 times finish is really light in weight.

作者: Simon 時間: 2010-3-8 23:11

波子都用Punto爸爸的colour scheme.

作者: Trevor 時間: 2010-3-8 23:17

幾時噴埋對鏡哩?

作者: paul 時間: 2010-3-9 11:07

But for the air intake, no way like this la

, it seems want to kiss somebody

作者: PuntoPatrick 時間: 2010-3-24 12:27

http://tw.page.bid.yahoo.com/tw/auction/b53506558

正４x98

作者: PuntoPatrick 時間: 2010-3-24 12:30

http://www.borbet.co.uk/

未見過呢個牌子

作者: 古惑強 時間: 2010-3-24 18:29

NT$15,000 = HK$3,600 + transport fee

If you can live with the Toyo tyre than it is a good price, otherwise only so-so!

Never heard of them neither!

歡迎光臨香港快意討論區 (http://forum.hkfiatclub.com/)