香港快意討論區 - Powered by Discuz! Board

標題: Sanwa MT4 / RX-461 / SSR SHR NOR [打印本頁]

作者: AbarthJoe 時間: 2011-11-24 18:34 標題: Sanwa MT4 / RX-461 / SSR SHR NOR

本帖最後由 AbarthJoe 於 2011-11-24 18:35 編輯

Servo / Rx (Receiver) matrix
[attach]4160[/attach]

Basically, all Sanwa SRG series servo support SSR (Fastest), SHR (Fast), NOR (Normal) mode

作者: AbarthJoe 時間: 2011-11-24 18:37

另外, 原來 M11x 同 RX-451R / RX-451 配合 SHR / NOR, 會得出唔同既結果.

1. The response select, when transmitting setup is adjusted (MOD) TYP = FH3 (FHSS-3)
(M11X : SHR) + (RX-451R) = SSR : Sanwa Super Response Modus
(M11X : NOR) + (RX-451R) = SHR : Sanwa High Response Modus
(M11X : SHR) + (RX-451) = SHR : Sanwa High Response Modus
(M11X : NOR) + (RX-451) = NOR : Normal Response Mous

作者: AbarthJoe 時間: 2011-11-24 18:40

本帖最後由 AbarthJoe 於 2011-11-24 18:41 編輯

仲有, MT4 既 Max Response Time 係 6.8ms, Average Response Time 係 4.2ms

Ref

而 4PL 既 frame rate 係 6.8ms

• 6.8ms frame rate (S-FHSS)

http://www.futaba-rc.com/systems/futk1400.html

作者: jockey 時間: 2011-11-25 01:39

thanks joe~

作者: AbarthJoe 時間: 2011-11-26 12:51

本帖最後由 AbarthJoe 於 2011-11-26 12:52 編輯

http://www.youtube.com/watch?v=r ... r_embedded&hd=1

好想知道 4PKS 到底有幾快!

歡迎光臨香港快意討論區 (http://forum.hkfiatclub.com/)