香港快意討論區 - Powered by Discuz! Board

標題: Alloy Hubcentric Wheel Spacer [打印本頁]

作者: Jason16VT 時間: 2009-5-6 23:04 標題: Alloy Hubcentric Wheel Spacer

Guys,

I am able to make a special arrange with JW Performance which is the advance technical supplier for our Fiat Club to set up a group buy of wheel spacer. The spacer will be hubcentric to perfit fit to our Fiat and made out of AL Alloy for the light weight. The thickness is available at 10, 15 & 20 mm. The price will be HKD450 for a pair. If any of you are interest in getting a set of two, please added to the below list.

10MM :
Jason x 2 pairs
Rikki x 1 pair
Red Dick x 1 pair

15mm:
Jason x 2 pairs

Regarding to the long bolts to fit with the spacer, Rikki can help you to get it.

作者: Eric 時間: 2009-5-7 08:46

10MM :
Jason x 2 pairs
Rikki x 1 pair
Red Dick x 1 pair
Eric x 1 pair

15mm:
Jason x 2 pairs
Eric x 1 pair

作者: Simon 時間: 2009-5-7 09:11

10MM :
Jason x 2 pairs
Rikki x 1 pair
Red Dick x 1 pair
Eric x 1 pair
Simon x 1 pair

15mm:
Jason x 2 pairs
Eric x 1 pair
Simon x 1 pair

作者: Everywheredoor 時間: 2009-5-7 11:47

10MM :
Jason x 2 pairs
Rikki x 1 pair
Red Dick x 1 pair
Eric x 1 pair
Simon x 1 pair

15mm:
Jason x 2 pairs
Eric x 1 pair
Simon x 1 pair
Red Dick x 1 pair

作者: 佐治仔 時間: 2009-5-8 13:56

10MM :
Jason x 2 pairs
Rikki x 1 pair
Red Dick x 1 pair
Eric x 1 pair
Simon x 1 pair
George x 1 pair

15mm:
Jason x 2 pairs
Eric x 1 pair
Simon x 1 pair
Red Dick x 1 pair
George X 1 pair

作者: Babybenz 時間: 2009-5-8 14:26

Price is good

作者: letsrock 時間: 2009-5-8 14:38

Jason, i need to ask for more advice before i place my order. When is the order closing?

作者: Jason16VT 時間: 2009-5-8 14:41

Actually, you can order at any time. I just want to gather more quanity in order for the supplier to save on their operation cost.

作者: letsrock 時間: 2009-5-8 14:50

8# Jason16VT

Noted. I will ask you about the benefits first on Sunday, as I am a dummy in mechanics (As most of you already know...)

作者: Trevor 時間: 2009-5-8 17:37

I want to know about what it does to the car too!

作者: 古惑強 時間: 2009-5-8 18:27

Letsrock, you shouldn't need them, as you car already has big spacers attached so that the OZ wheel could clear the Brembo capiler. However as precautions, you should take down the wheel and have a look at the spacers to ensure it is hub-centric spacer as well. As I have no idea what type of spacer the ex-owner had put on the car, if it is one of those universe type (non-hub centric one), I would strongly suggest you to replace it with a hub-centric type, it is significantly safer!

The spacer improves the look of the car, as the wheels are pushed outwards towards the edge of the body work, looks a lot more aggressive than before. It also suppose to (marginally) increase the ultimate cornering limit, as the track width is 20~30mm wider than before.

作者: AbarthJoe 時間: 2009-5-8 23:36

How can I choose the width then? I've no idea on this...
F 0MM / R 10MM
F 10MM / R 10MM
F 10MM / R 15MM

Or just like Jason to order both 2 set to mix & match?

作者: Jason16VT 時間: 2009-5-8 23:46

For my 16VT, I am using F 10mm/R 15mm

作者: 古惑強 時間: 2009-5-8 23:56

How can I choose the width then? I've no idea on this...
F 0MM / R 10MM
F 10MM / R 10MM
F 10MM / R 15MM

Or just like Jason to order both 2 set to mix & match?
AbarthJoe 發表於 2009-5-8 23:36

All 3 combinations are ok!
I am a cheap and lazy ass, so I take option 1 F 0 / R 10
Jason is max power guy, so he takes option 3 F 10 / R 15

作者: AbarthJoe 時間: 2009-5-9 11:34

thanks a lot.

作者: letsrock 時間: 2009-5-9 19:42

Thanks Rikki, so mind as well just get a set then.
10MM :
Jason x 2 pairs
Rikki x 1 pair
Red Dick x 1 pair
Eric x 1 pair
Simon x 1 pair
George x 1 pair
Letsrock x 1 pair
15mm:
Jason x 2 pairs
Eric x 1 pair
Simon x 1 pair
Red Dick x 1 pair
George X 1 pair
Letsrock x 1 pair

作者: TheBlackCoupe 時間: 2009-5-10 13:24

提示: 作者被禁止或刪除內容自動屏蔽

作者: letsrock 時間: 2009-5-10 16:00

UPDATED
10MM :
Jason x 2 pairs
Rikki x 1 pair
Red Dick x 1 pair
Eric x 1 pair
Simon x 1 pair
George x 1 pair
Letsrock x 2 pairs
Adrian x 1 pair
15mm:
Jason x 2 pairs
Eric x 1 pair
Simon x 1 pair
Red Dick x 1 pair
George X 1 pair
Adrian x 1 pair

作者: Jason16VT 時間: 2009-5-16 09:12

Guys,

Get 28 spacers made, 10mm x1 6 & 15mm x 12. Will pass it out this SMD, so get your money ready.

作者: 古惑強 時間: 2009-5-23 08:38

本帖最後由古惑強於 2009-5-23 08:47 編輯

40mm bolt
Eric x 8
Simon x 8
Letsrock x 16 (wobbly head)
Adrian x 8 (wobbly head)

45mm bolt
Eric x 8
Simon x 8
Adrian x 8 (wobbly head)

Adrian, let me know whether you still want these bolts given the change in circumstances.

作者: letsrock 時間: 2009-5-23 08:56

Thaks rikki, So that is what i need?

"Letsrock x 16 (wobbly head)"

作者: 古惑強 時間: 2009-5-23 10:09

Yes, because your wheels are 100pcd wheels, you need wobby bolts in order to fit on to the 98pcd coupe hubs. Your existing bolts would be too short after adding on the spacers.

作者: letsrock 時間: 2009-5-23 10:41

Noted, Many thanks!

作者: TheBlackCoupe 時間: 2009-5-23 14:08

提示: 作者被禁止或刪除內容自動屏蔽

作者: Jason16VT 時間: 2009-5-23 20:41

16 in wheel will be the best.

作者: 古惑強 時間: 2009-5-24 06:43

Yes, 16" gives the best composition for ride etc. However if you are using aftermarket wheels, you will need to be certain that the wheels can clear your Brembo brakes.

作者: 古惑強 時間: 2009-5-26 19:56

本帖最後由古惑強於 2009-6-22 15:12 編輯

40mm bolt
Eric x 8
Simon x 8
Letsrock x 16 (wobbly head)
Adrian x 8 (wobbly head, to be confirmed)
George x 8
Jockey x 8

45mm bolt
Eric x 8
Simon x 8
Adrian x 8 (wobbly head, to be confirmed)
George x 8
Jockey x 8

Order closing by this Friday.

作者: 古惑強 時間: 2009-6-1 18:05

Order closed.

作者: Simon 時間: 2009-7-4 18:27

痴拿線, D 轆螺絲上到石屎咁實, 拆到小晒老母.
好攰....

作者: peterkoon 時間: 2009-7-4 18:54

加D KY 咪得 law

作者: Simon 時間: 2009-7-5 19:05

用左全新神哥改良型spacer，加左兩個窿容許有兩粒螺絲上緊迫力碟.
將軚震問題完全解決.

作者: Simon 時間: 2009-7-13 21:02

Jason, after fitting the spacer, i feel something.
now, i am fitted with front 10mm, rear 15mm.
我覺得在鹿頸快彎時, 當彎中車一拋之後落地, 突然會响呔,
即係..呔的抓地力突然有變.
我覺得以前比較漸進.
要再試下.

作者: Jason16VT 時間: 2009-7-13 22:19

Understand, but you should also put in the consideration that you tires are almost all worn out.

作者: Simon 時間: 2009-7-13 22:40

都啱, 可能呔外同呔內抓地力差好多, 落地剎那用呔外, 再壓下時就用到呔內, 可能因此出現變化.
繼續測試一下.

作者: 古惑強 時間: 2009-10-8 17:56

Oh shit! Forgot to charge you guys for the nuts!

作者: coupeelvin 時間: 2009-10-8 22:38

Can I get one set now for fitting my 17" OZ wheels? (spacers + wobby heads and bolts). But I don't know how wide should be the spacers, and how long should be those bolts.

作者: Simon 時間: 2009-10-8 22:42

I sell you mine la, i do not quite like it.

作者: letsrock 時間: 2009-10-8 22:42

Elvin, I have a spare set available if you want.

歡迎光臨香港快意討論區 (http://forum.hkfiatclub.com/)