letsrock

Thaks rikki, So that is what i need?

"Letsrock x 16 (wobbly head)"

古惑強

Yes, because your wheels are 100pcd wheels, you need wobby bolts in order to fit on to the 98pcd coupe hubs.  Your existing bolts would be too short after adding on the spacers.

letsrock

Noted, Many thanks!

Jason16VT

16 in wheel will be the best.

古惑強

Yes, 16" gives the best composition for ride etc.  However if you are using aftermarket wheels, you will need to be certain that the wheels can clear your Brembo  brakes.

古惑強

40mm bolt
Eric x 8
Simon x 8
Letsrock x 16 (wobbly head)
Adrian x 8 (wobbly head, to be confirmed)
George x 8
Jockey x 8

45mm bolt
Eric x 8
Simon x 8
Adrian x 8 (wobbly head, to be confirmed)
George x 8
Jockey x 8

Order closing by this Friday.

古惑強

Order closed.

Simon

痴拿線, D 轆螺絲上到石屎咁實, 拆到小晒老母.
好攰....

peterkoon

加D KY 咪得 law

Simon

用左全新神哥改良型spacer，加左兩個窿容許有兩粒螺絲上緊迫力碟.
將軚震問題完全解決.

Simon

Jason, after fitting the spacer, i feel something.
now, i am fitted with front 10mm, rear 15mm.
我覺得在鹿頸快彎時, 當彎中車一拋之後落地, 突然會响呔,
即係..呔的抓地力突然有變.
我覺得以前比較漸進.
要再試下.

Jason16VT

Understand, but you should also put in the consideration that you tires are almost all worn out.

Simon

都啱, 可能呔外同呔內抓地力差好多, 落地剎那用呔外, 再壓下時就用到呔內, 可能因此出現變化.
繼續測試一下.

古惑強

Oh shit!  Forgot to charge you guys for the nuts!

coupeelvin

Can I get one set now for fitting my 17" OZ wheels? (spacers + wobby heads and bolts). But I don't know how wide should be the spacers, and how long should be those bolts.

Simon

I sell you mine la, i do not quite like it.

letsrock

Elvin, I have a spare set available if you want.