16v turbo 葉

Simon

唔知點解我地個turbo, 有大細葉片.
唔知係咪叫twin blade 設計, 不過又搵唔到參考資料

Simon

好似幅圖咁,係兩塊大葉中間有多一塊細葉

Simon

好似咁.

Simon

應該係針對提升低轉起動用, 不過呢件野有無咩特性呢...好想知, 因為升級時怕錯改佢性能.

古惑強

http://etd.lib.nsysu.edu.tw/ETD- ... =etd-0727100-174134

Possibly , it is a trade off between design vs manufacturing cost, as it is cheaper to make multi-blade design instead of a single series of continuously bending blade.  Btw, are you referring to the compressor side or the turbine side blade?

古惑強

Simon, are you considering to upgrade your turbo?

Simon

唔係upgrade 個 turbo, 係唸緊d waste gate 可唔可以有得玩下啫.

Simon

Inducer, Exducer, trim.... hmmm... 有趣, 第一次聽, 新事物.
真係多野學.

古惑強

唔係upgrade 個 turbo, 係唸緊d waste gate 可唔可以有得玩下啫.
Simon 發表於 2009-10-14 14:37

You can use the Integrale wastegate, they are set to 0.6 bar instead of 16vt coupe 0.5 bar, so that you can get a higher base boost than stock.  However, if you are already using a boost controller, there isn't much point in changing the waste gate at all.