16v turbo 蕉

Rank: 8 Rank: 8

2^#

Simon發表於 2009-10-9 05:27 | 只看該作者

英國仔又有好野.
I can supply you with one of the more advanced manifolds, these have
cone style collectors, they are lighter and all round better finish.
I'm selling these for £275 each and the delivery to Hong Kong will be
£100.

逢星期日...糕-糕-糕.

Rank: 10

3^#

古惑強發表於 2009-10-9 11:29 | 只看該作者

Go! Go! Go! More Flow = More Power!

Rank: 10

4^#

letsrock發表於 2009-10-9 11:34 | 只看該作者

Any good ones for 20V?

Rank: 10

5^#

古惑強發表於 2009-10-9 12:01 | 只看該作者

Yes, from the same seller.

Rank: 10

6^#

letsrock發表於 2009-10-9 12:07 | 只看該作者

Group ordering soon?

Rank: 10

7^#

古惑強發表於 2009-10-9 12:09 | 只看該作者

Why don't you speak to Simon on this.

Rank: 10

8^#

letsrock發表於 2009-10-9 12:13 | 只看該作者

Noted. Many thanks.

Rank: 10

9^#

Jason16VT發表於 2009-10-10 11:58 | 只看該作者

Just want to let you guys know, all the 蕉 sold by this UK guy is made in China.

Rank: 10

10^#

letsrock發表於 2009-10-10 18:12 | 只看該作者

really?!

Rank: 10

11^#

Jason16VT發表於 2009-10-11 11:45 | 只看該作者

Raymond Sir, I say all the 蕉 sold by this UK guy is made in China.

Rank: 8 Rank: 8

12^#

Simon發表於 2009-10-14 09:19 | 只看該作者

無所謂係咪大陸野啦, 我而家都好接受, 佢運去英國地址都係十磅, ok喎.
20v turbo無升級, 只係更換型.
有ceramic coating加, 不過無報價, 未知幾貴, 我仍然打算加硼帶.

逢星期日...糕-糕-糕.

Rank: 10

13^#

古惑強發表於 2009-10-14 10:07 | 只看該作者

Ceramic coating is very expensive, as it needs specialised equipment for spraying the ceramic material, I doubt it any HK base garage nor modification shop has this type of industrial strength equipment.

Rank: 10

14^#

letsrock發表於 2009-10-14 11:55 | 只看該作者

無所謂係咪大陸野啦, 我而家都好接受, 佢運去英國地址都係十磅, ok喎.
20v turbo無升級, 只係更換型.
有ceramic coating加, 不過無報價, 未知幾貴, 我仍然打算加硼帶.
Simon 發表於 2009-10-14 09:19

So pointless for me to get it then?

Rank: 10

15^#

古惑強發表於 2009-10-14 12:07 | 只看該作者

Only if your existing 20vt cast iron exhaust manifold has cracked between no. 4 & 5, otherwise there is no need to change. On the other hand, this16vt aftermarket design is an equal length one, so it will benefit the air flow to the turbine.

Rank: 10

16^#

letsrock發表於 2009-10-14 18:26 | 只看該作者

Thanks Rikki.

Rank: 8 Rank: 8

17^#

Simon發表於 2009-10-20 09:39 | 只看該作者

有實物.

附件: 您需要登錄才可以下載或查看附件。沒有帳號？註冊

逢星期日...糕-糕-糕.

Rank: 8 Rank: 8

18^#

Simon發表於 2009-10-20 09:40 | 只看該作者

不過好似好難包硼帶.

逢星期日...糕-糕-糕.

Rank: 10

19^#

Jason16VT發表於 2009-10-20 10:49 | 只看該作者

Simon,

After you received the manifold, check the aligment of the holes to match with the head and turbo. The one that I installed, it needs to drill out 2 hole to match the head and one hole to match the turbo housing. If you cannot do it yourself, it needs to go to a machine shop for the potting. Hope the one you receive is his second batch and with a better spec.

Rank: 8 Rank: 8

20^#

Simon發表於 2009-10-20 15:48 | 只看該作者

Asked him, and he confirmed the holes are good now.

I feel less worry. Thanks jason for the reminder.

Hi Simon the holes are now perfect and I have also matched the ports
perfectly to a spesso gasket. Like I said these are a much better
manifold. Paul

Sent from my iPhone

On 20 Oct 2009, at 06:24, Simon <guncoupe@netvigator.com> wrote:

> Hello Paul,
> This is good, Paul, looks really good.
> I have one more question.
> As my friend bought a manifold from you last year, the
> mounting holes for the manifold to the cylinder head do
> not exactly match to the bolt locations. 2 of them are out
> of position slightly and need machining to become exact
> fit.
> I hope this new batch of manifold has sorted out this
> problem.
> Thank you very much.
> Cheers
> Simon
>

逢星期日...糕-糕-糕.