coupeelvin

最平唔係移植20VT咩?

Simon

其實都係架. 不過未唸到點樣配一套平d嘅16吋鈴.

古惑強

全港得一份20vt頭迫力料都已經被條醒目仔收購左！　再要就谷住去外地塭啦！

coupeelvin

其實都係架. 不過未唸到點樣配一套平d嘅16吋鈴.
Simon 發表於 2010-6-21 09:12

咦！ 我突然諗起我仲有一套 黑色嘅 OZ鈴喎。 以前我部PUNTO 開篷用果套...唔知配落coupe度會點樣?
有興趣就攞去喇。

古惑強

If Simon does not take it then can I be in the 2nd position, would be interesting for my Bravo too!

Simon

Elvin, 多謝你.不過我唔要啦.

Simon

http://speedyautoparts.maifou.net/article.php?id=20

Simon

Detail AP brake dimension

coupeelvin

If Simon does not take it then can I be in the 2nd position, would be interesting for my Bravo too!

Yes sure! Please take them.

Simon

Brake disc:

如果用20v turbo 碟 304mm 直徑 x 28mm 厚 , bell 唔駛改PCD. GBP135 Brembo
比較起2piece rotors係唔夠厚, heat capacity無咁多. 2 piece仲可以用再大D size brake disc.
比較起16v turbo 碟 284mm 直徑 x 22mm厚, 已經大左10mm moment arm, 3.5% increased.

Simon

咦, 有多d reference喎
http://www.race.fi/en/product/20 ... 00.00%E2%82%AC.html
雖然明知D2唔係好野, 不過d 數字啱用.

Simon

台仔XYZ 已經整定左.

Simon

賣GBP 1049 ~ HKD13000
目標要係佢之內.
Brake hose
Brake caliper mounting
Brake caliper
Brake rotor
Brake hat

Simon

Design your own 4 pot brake

Simon

http://www.rallydesign.co.uk
呢間野齊料喎
細aluminium block for caliper mount GBP14 x 2 http://www.rallydesign.co.uk/pro ... mp;products_id=8315
Universal bell GBP 56 x 2 http://www.rallydesign.co.uk/pro ... mp;products_id=4018
Wilwood 298.5mm rotor  GBP 89.5 x 2 http://www.rallydesign.co.uk/index.php?cPath=562_1214_1217
4 pot Wilwood Forged radial mount Midilite GBP 139.5 x 2 http://www.rallydesign.co.uk/pro ... mp;products_id=8317
Mintex M1144 Brake pad GBP50
土炮啤喉 $1000

Simon

合共 GBP650+HKD 1000 ... 幾好幾好.

Simon

http://www.compbrake.co.uk/BRAKEKITS/BRAKEKITS_FIAT.html
20v turbo 就有, 16v turbo 就唔駛嘅   !!!!!

PuntoPatrick

tarox有16v Turbo o既kit
http://www.needforspeed.co.uk/pa ... &PartType=BRT06
我用緊o既台記WP pro都有出coupe 6pot套裝
http://www.winnerpower.com.tw/English/Match/match_fiat.html

Simon

而家睇多左開始明白, 造橋造brake top hat 98mm PCD都唔難搵到.
可以開始留意價錢.

Simon

xyz套303mm迫力kit要$11300, Max Motor Sport可以訂.