香港快意討論區 » 有買有賣 » Alloy Hubcentric Wheel Spacer

返回列表發帖

Rank: 10

1^# 跳轉到 » 正序看帖

字體大小: tT

Jason16VT發表於 2009-5-6 23:04 | 只看該作者

Alloy Hubcentric Wheel Spacer

Guys,

I am able to make a special arrange with JW Performance which is the advance technical supplier for our Fiat Club to set up a group buy of wheel spacer. The spacer will be hubcentric to perfit fit to our Fiat and made out of AL Alloy for the light weight. The thickness is available at 10, 15 & 20 mm. The price will be HKD450 for a pair. If any of you are interest in getting a set of two, please added to the below list.

10MM :
Jason x 2 pairs
Rikki x 1 pair
Red Dick x 1 pair

15mm:
Jason x 2 pairs

Regarding to the long bolts to fit with the spacer, Rikki can help you to get it.

Rank: 10

38^#

letsrock發表於 2009-10-8 22:42 | 只看該作者

Elvin, I have a spare set available if you want.

Rank: 8 Rank: 8

37^#

Simon發表於 2009-10-8 22:42 | 只看該作者

I sell you mine la, i do not quite like it.

逢星期日...糕-糕-糕.

Rank: 10

36^#

coupeelvin發表於 2009-10-8 22:38 | 只看該作者

Can I get one set now for fitting my 17" OZ wheels? (spacers + wobby heads and bolts). But I don't know how wide should be the spacers, and how long should be those bolts.

Rank: 10

35^#

古惑強發表於 2009-10-8 17:56 | 只看該作者

Oh shit! Forgot to charge you guys for the nuts!

Rank: 8 Rank: 8

34^#

Simon發表於 2009-7-13 22:40 | 只看該作者

都啱, 可能呔外同呔內抓地力差好多, 落地剎那用呔外, 再壓下時就用到呔內, 可能因此出現變化.
繼續測試一下.

逢星期日...糕-糕-糕.

Rank: 10

33^#

Jason16VT發表於 2009-7-13 22:19 | 只看該作者

Understand, but you should also put in the consideration that you tires are almost all worn out.

Rank: 8 Rank: 8

32^#

Simon發表於 2009-7-13 21:02 | 只看該作者

Jason, after fitting the spacer, i feel something.
now, i am fitted with front 10mm, rear 15mm.
我覺得在鹿頸快彎時, 當彎中車一拋之後落地, 突然會响呔,
即係..呔的抓地力突然有變.
我覺得以前比較漸進.
要再試下.

逢星期日...糕-糕-糕.

Rank: 8 Rank: 8

31^#

Simon發表於 2009-7-5 19:05 | 只看該作者

用左全新神哥改良型spacer，加左兩個窿容許有兩粒螺絲上緊迫力碟.
將軚震問題完全解決.

附件: 您需要登錄才可以下載或查看附件。沒有帳號？註冊

逢星期日...糕-糕-糕.

Rank: 10

30^#

peterkoon發表於 2009-7-4 18:54 | 只看該作者

加D KY 咪得 law

Rank: 8 Rank: 8

29^#

Simon發表於 2009-7-4 18:27 | 只看該作者

痴拿線, D 轆螺絲上到石屎咁實, 拆到小晒老母.
好攰....

逢星期日...糕-糕-糕.

Rank: 10

28^#

古惑強發表於 2009-6-1 18:05 | 只看該作者

Order closed.

Rank: 10

27^#

古惑強發表於 2009-5-26 19:56 | 只看該作者

本帖最後由古惑強於 2009-6-22 15:12 編輯

40mm bolt
Eric x 8
Simon x 8
Letsrock x 16 (wobbly head)
Adrian x 8 (wobbly head, to be confirmed)
George x 8
Jockey x 8

45mm bolt
Eric x 8
Simon x 8
Adrian x 8 (wobbly head, to be confirmed)
George x 8
Jockey x 8

Order closing by this Friday.

Rank: 10

26^#

古惑強發表於 2009-5-24 06:43 | 只看該作者

Yes, 16" gives the best composition for ride etc. However if you are using aftermarket wheels, you will need to be certain that the wheels can clear your Brembo brakes.

Rank: 10

25^#

Jason16VT發表於 2009-5-23 20:41 | 只看該作者

16 in wheel will be the best.

TheBlackCoupe 該用戶已被刪除	24^# TheBlackCoupe發表於 2009-5-23 14:08 \| 只看該作者提示: 作者被禁止或刪除內容自動屏蔽
TheBlackCoupe 該用戶已被刪除
	TOP

Rank: 10

23^#

letsrock發表於 2009-5-23 10:41 | 只看該作者

Noted, Many thanks!

Rank: 10

22^#

古惑強發表於 2009-5-23 10:09 | 只看該作者

Yes, because your wheels are 100pcd wheels, you need wobby bolts in order to fit on to the 98pcd coupe hubs. Your existing bolts would be too short after adding on the spacers.

Rank: 10

21^#

letsrock發表於 2009-5-23 08:56 | 只看該作者

Thaks rikki, So that is what i need?

"Letsrock x 16 (wobbly head)"

Rank: 10

20^#

古惑強發表於 2009-5-23 08:38 | 只看該作者

本帖最後由古惑強於 2009-5-23 08:47 編輯

40mm bolt
Eric x 8
Simon x 8
Letsrock x 16 (wobbly head)
Adrian x 8 (wobbly head)

45mm bolt
Eric x 8
Simon x 8
Adrian x 8 (wobbly head)

Adrian, let me know whether you still want these bolts given the change in circumstances.