coupeelvin

Investingating Bravo's top mount to replace Coupe's top mount.  http://www.fccuk.org/forum/ubbth ... r=968494&page=1
And Weitec distance kit at the rear....

古惑強

Anthony's OZ is a different series.

AbarthJoe

Letsrock  我問過佢喇，佢係 40 呔， 印象中spacer 應該係10mm.
coupeelvin 發表於 2010-2-24 23:43

10mm? 頭尾都係呀？印象中，佢前後好似唔一樣？我唔記得有無撈亂 Letsrock 同 Anthony 既 Setting.  因為 Anthony 都係 OZ.

咁 40 呔係重點喎。

coupeelvin

Letsrock  我問過佢喇，佢係 40 呔， 印象中spacer 應該係10mm.

AbarthJoe

Elvin, 你會唔會照抄 Letsrock 既 setting 好 D 呀？大家都係 17吋 OZ, 就算 ET值 唔一樣, 都係加減數計番個 Offset 係一樣咪得 lor.

peterkoon

just back with the 緩衝墊, 結論效果不大，我諗下一步要換尖頭胎。

古惑強

With hub centric spacer, 10~12mm is minimum otherwise there is insufficient material to secure the hub extension.

Or you can invest in a set of coil-overs like what Jockey / JRT did, and you don't need to worry about the ride height anymore.

coupeelvin

睇張相...你條鈴都真係出左Ｄ，offset幾多黎？
PuntoPatrick 發表於 2010-2-24 23:16

OZ 好似係 ET37, spacer 係前10mm 後15mm

PuntoPatrick

睇張相...你條鈴都真係出左Ｄ，offset幾多黎？

coupeelvin

買果對墊加安裝價錢同效能, 會唔會比賣走對RE-11, 而換一對215/40R17 Sports RS為高呢?
Simon 發表於 2010-2-24 19:17

我對40呔冇咩野好感....所以我先揀45呔。 而家我當然想繼續用45呔喇。

coupeelvin

Patrick 講得啱。 我諗緊前面最細offset應該係幾多呢? 而家係10mm， 如果縮到6mm又得唔得呢?
跟住要升高番條避震大約10mm， 所以我諗option 2 唔係咁work， 佢只係限制彈弓行程， 唔係提高部車。

PuntoPatrick

吾係Apex...係無力既Pi,
我既問題係套鈴個offset太盡，條鈴出得濟...攪一大輪...買過套彈弓。而家後座坐滿人有時都會少少刮到。

古惑強

我係你最好就較番o岩個offset，吾用spacer，

Cannot wow, as 17" OZ cannot clear the 20vt Brembo brake caliper without using spacers.

Simon

patrick, 我記得你係過來人, 以前套APEX彈弓攪左你架Punto好耐.

PuntoPatrick

我覺得你裝套舊彈簧膠都未必吾刮沙板，我以前後軑刮沙板裝左都繼續刮，幫助好少，而且裝左呢舊野會影響左個彈簧行程跟住架車會多左無為既彈跳，如果係後軑還好，裝前面架車會浮下浮下咁...

我係你最好就較番o岩個offset，吾用spacer，買過Ｄ螺絲，再吾得就修改沙板內隔，再吾得俾錢人摺輪弓邊。

Simon

買果對墊加安裝價錢同效能, 會唔會比賣走對RE-11, 而換一對215/40R17 Sports RS為高呢?

letsrock

If it is not too heavy, yes.  My next taiwan trip would be May.

coupeelvin

I am in Taiwan now....
letsrock 發表於 2010-2-24 18:09

Do you imply you can bring parts back to HK?

letsrock

I am in Taiwan now....

古惑強

Both option 1 & 2 should be ok.