coupeelvin

想問下最終評價如何? 值唔值得買?

Simon

DUN吓DUN吓DUN甩左個尾鼓.
好彩帶齊工具和手套去緊jockey車房, 又夠慢溜, 否則收唔到科又要拖.
無左個鼓, 把聲超澎湃!!!!

Simon

用左jockey彈弓行左成日, 好左好多.
發現我地套野有兩個問題
1. 尾彈弓太硬, 雖然長度圈數直徑相同
2. 尾彈弓托太長, 頂住, 只容許兩寸行程.

Simon

係呀, 搬屋責重到爆, 架車即刻定晒.
肯定係彈弓太硬.
約左jockey星期六早上油塘試避震.

AbarthJoe

Need to get some 2.5K or 2.7K rear spring from Taiwan.  Headache!
古惑強 發表於 2010-10-5 09:24

我地都係用直圈彈弓... 唔知其他牌子啱唔啱?  

毒王, 你之前係咪用呢個牌字?
http://www.swiftsprings.com/faq.html

古惑強

Simon had tested it by adding plenty of weight to the boot and it did solved the bouncy problem, but obviously it is not a good solution in adding weight.  We need to source another set of rear spring with lower mm/kg.

coupeelvin

避震真係好頭癢.....

古惑強

Need to get some 2.5K or 2.7K rear spring from Taiwan.  Headache!

Eric

用番原裝尾機+彈弓啦, 一早套尾機行程唔夠, 彈弓又硬,
而家用番KW套尾機, 好行好多.
真係一分錢, 一分貨.

AbarthJoe

唔掂唔掂. 好dun呀, 揸左兩日返工, dun到頸都痛.
個尾真係要攪好佢.
Simon 發表於 2010-10-5 08:38

食完 Fat Lady, 唔想食意粉.

Simon

唔掂唔掂. 好dun呀, 揸左兩日返工, dun到頸都痛.
個尾真係要攪好佢.

Simon

前8後8 setting 啱喇.
神哥整緊十塊墊片, 6mm, 10mm
low到最低要用6mm.

Trevor

唔係咁q流呀~!?

古惑強

第二批尾托已經到了，不過比良師傅睇過後，佢叫我放棄依套台仔尾托，土炮造過冇咁慶！

AbarthJoe

又出事. 坐唔晒入去.
最尾...唉, 唔裝住喇.
Simon 發表於 2010-8-20 19:57

咁係條野太長? 定係隧道太短? 入唔晒? 咁起碼入到都 OK la?

Simon

唸清楚之後, 肯定我地唔可以用個台仔托, 就算點整都唔用到.
因為我而家只係用個鋁圈連膠墊只係14mm厚, 頂多都係校佢10mm8mm, 如果加個台仔野, 就minimum height都唔止14mm, 即無可能low得低.
應該係條彈弓太長或太硬.
我地五套野應該只係車一D鋁圈作為校高低之用.

Simon

神哥, 有無計呢?

Simon

又出事. 坐唔晒入去.
最尾...唉, 唔裝住喇.

Simon

早早返屋企, 再拆.

jockey

換我果條彈弓試下