返回列表 發帖
本帖最後由 Simon 於 2010-7-9 17:58 編輯

set 左, 架車而家好好揸, 唔拋, 上落山"伏".
頭再low低15mm, 即係由底離內筒33mm
尾set高5mm, 用左塊spacer. 不過, 台仔因為整錯野比我地, 會再send過五套尾adjuster來.
damping. 頭 5  尾, 應set去5-6左右.
佢仲machine大左個螺絲位, 可以set到挨埋車身的-ve camber.否則盡晒都係0度.
而家係-1.5deg. feel good.

現時車身高度, 頭60cm, 尾62cm.
逢星期日...糕-糕-糕.

TOP

http://www.yellow-speed.com/dynamic-pro-sport.php 所指, yellow speed有bump同rebound校.
逢星期日...糕-糕-糕.

TOP

Let's set the front shocks to slightly harder as well, because Jockey's super car uses a tougher anti-roll bar than a standard coupe, so he could be using a softer shocks setting than you would ideally be using.

TOP

分唔到, 不過似個頭. 一拋就想過對面. up吓up吓咁衝落山.
逢星期日...糕-糕-糕.

TOP

Front or the rear?

TOP

征服唔到大山, 拋左過對面咁濟. 好牙煙.
逢星期日...糕-糕-糕.

TOP

唔知係咪行慢車好跳呢?
今朝快唔到, 我記得星期日無咁跳架喎!
Simon 發表於 2010-7-8 09:28



2 things here :

1. may be the springs have settled down and compressed a little bit more after 1 week, so the kg/mm rate has gone up a bit.
2. you can try to compensate the slightly higher kg/mm spring rate by tuning the rear shocks to be 1 or 2 degree harder to match the spring rate and try try!

TOP

Yes, compare to my KW V2, the rear (setting a rate 15) is a bid bumpy.

TOP

校toe工具, 20 & 11, 擰出toe in, 擰入 toe out
逢星期日...糕-糕-糕.

TOP

唔知係咪行慢車好跳呢?
今朝快唔到, 我記得星期日無咁跳架喎!
逢星期日...糕-糕-糕.

TOP

已裝,但頭尾太高, 要low 底15mm 左右,
軚尺唔啱, 左左唧, 要low 底完行番兩三星期,
等彈弓坐定左先去度軚尺.

TOP

本帖最後由 Simon 於 2010-7-7 20:13 編輯

尾唔裝校高低個托
set camber盡晒, set左toe, 避震筒擰入至46mm
最後高度前63.5cm, 尾61cm
附件: 您需要登錄才可以下載或查看附件。沒有帳號?註冊
逢星期日...糕-糕-糕.

TOP

個窿係準備好51mm, 估佢都係放入去, 不過有個野頂住.
附件: 您需要登錄才可以下載或查看附件。沒有帳號?註冊
逢星期日...糕-糕-糕.

TOP

我無錯喎!!!!
係個彈弓托個底有個螺絲位令佢放唔入個搖臂凸位度.
我覺得係個托有問題!!!
附件: 您需要登錄才可以下載或查看附件。沒有帳號?註冊
逢星期日...糕-糕-糕.

TOP

我果套係豪華版
Coupe Coupe Go Go Go!!

TOP


我果套無刻度嘅?!?!
逢星期日...糕-糕-糕.

TOP

真係想而家落去拆左佢.
無奶油上次留意唔到. 拆螺絲時一定見裡面舊圓野分開.
附件: 您需要登錄才可以下載或查看附件。沒有帳號?註冊
逢星期日...糕-糕-糕.

TOP

Spring upside down?

TOP

點錯法....

TOP

原來我裝錯左!!!!!
逢星期日...糕-糕-糕.

TOP

返回列表