返回列表 發帖
本帖最後由 raypoon 於 2011-5-12 11:55 編輯

回復 19# bobby


    Why not ?? Actually faster than Ni-MH....According from my friend info ...LiPo can use 10A current to charge .....25-30 mins fully charge the 6000mah ....Moreover , 10A to charge ...the battery performance totally difference with lower current ....

TOP

本帖最後由 raypoon 於 2011-5-12 12:18 編輯

回復 22# greenbug


    Sure , "MUST" use Balance charge mode....balance charge also can fast ....

If you using the Imax B6 charger ....you can see the current drop to below 1.5 A even you select the 5A to charge ....

WHY?? Coz  the Imax B6 charger starting to balance around 4.0 V to 4.1 V per cell ....so , if one cell fully charged to 4.2V and the other cell still below 4.2V.....what the charger will do ???  discharge the 4.2V cell to bit lower V and recharge again ......again and again ....so , you may spend around 2 hours to charge a 5500ma LIPO.....---__---""

   so ,what difference of expensive charger.....??  The balance mode started once you press "START" button ..... 2 cell in very close V. all time .... so ,2 cells very easy  fully charge to 4.2V at the same time .....thats why I decided to invest.....

TOP

回復 27# 佐治仔


    y?

TOP

返回列表